ADAPTiQ system setup and deactivation | Lifestyle® Homewide powered speaker system

Before you begin, be sure the speakers are connected placed where you want them.

1. Plug in the ADAPTiQ headset to the Audio IN jacks on the Acoustimass module
2. If it is not already, push switch C on the Acoustimass module to the down position
3. Put the ADAPTiQ headset on your head. (Tip: Be sure the L and R letters on the headset are above your left and right ears)
4. Press and release the ADAPTiQ button on the Acoustimass module to start the calibration process. (Tip: Press the ADAPTiQ button to scroll through the available languages, then press the Play or Track Forward button [depending on your remote] to select a language)
5. Stand the Acoustimass module on its feet (or as you will position it normally)
6. Follow the voice prompts to calibrate your system
7. Once complete, unplug the headset and, if switch C was changed in step 2, change it to the orignal position

On the bass module, press and hold the ADAPTiQ button for about 10 seconds until a message is heard from your speakers to confirm.