ADAPTiQ system setup and deactivation | Lifestyle® V25 home entertainment system

Before you begin, be sure the speakers are connected placed where you want them.

1. On the system console, press the Setup button. (Tip: If the system menu does not appear on your TV, be sure the correct TV input is selected)
2. On the remote control, scroll down to select ADAPTiQ, then press the OK button
3. Follow the on-screen instructions to calibrate your system

Note: Your system software must be version 01.06.00 or later. For more info, see Checking the software or firmware version.

1. On the system console, press the Setup button. (If the system menu does not appear on your TV, be sure the correct TV input is selected)
2. Use your remote to select ADAPTiQ
3. Press the Right arrow button to view the ADAPTiQ options
4. Select Enable/disable, then press OK
5. When prompted to disable ADAPTiQ, select Yes, then press OK
   Tip: The ADAPTiQ audio calibration settings are disabled but not erased. You can re-enable them at any time
6. Press the Exit button to close the menu

Tip: Your calibration settings are disabled but not erased. They can be re-enabled at any time.