Was this helpful?
Microphone does not pick up sound | Bose mobile in-ear headset v2
Select how the device is connected:
Using a wired connection
Remove and reseat the audio cable in the connected device.
On the connected device, disconnect the cable that connects to your headset then reconnect it to be sure it is fully connected and secure. If you rotate the plug in the jack and hear crackling or intermittent sound, there might be debris inside the jack or on the headphone plug.
Check the condition of the audio plug on your product.
If the audio connector on your product is broken, frayed or damaged, it might not play audio as expected. If it is damaged, your product may need service.
Reboot the connected device.
Electronics might need to be reset from time-to-time—much like rebooting a computer. Power off the device, then power it back on and try again.
Remove the connected device from any case or protective sleeve.
A case or sleeve may prevent the audio cable from seating properly into the headphone jack. If using a case, remove it and try again.
Check that the headphone jack is clean and free of debris.
Use a flashlight or other light source to check if any lint or debris has entered the headphone jack on the device, which can interfere with the connection.
