No power | SoundLink® around-ear headphones
soundlink®-around-ear-headphones
SoundLink® around-ear headphonesSold from 2013 - 2015

No power | SoundLink® around-ear headphones

Be sure the headset is powered on.

On the bottom of the headset, make sure the power switch is in the on position, indicated by the visible green area under the switch. The LED will light for 10 seconds after being turned on.

Check if the battery is charged.

Be sure the battery is not depleted. For more info see, Checking the remaining battery charge and Charging your headphones.

Use a wall outlet USB charger to charge your headset.

Charger specifications vary. Be sure to use a UL/CE approved charger that provides 1 Amp. (Tip: Chargers that provide lower amperage (like a computer USB port) will take longer to charge your headset.)

Disconnect and reconnect the charging cable at both ends.

Unplug both ends of the USB cable then reconnect both ends to ensure they are firmly connected to the headphones and the USB power source.

Reset your product.

Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more information, see Resetting your product.

Replace the Bluetooth® Module.

Consider warranty status of the headphones when replacing its Bluetooth module.