Resetting your product | Bose Sport Open Earbuds
bose-sport-open-earbuds
Bose Sport Open EarbudsSold from 2026

Resetting your product | Bose Sport Open Earbuds

To reset the earbuds:

Note: Resetting the earbuds clears its Bluetooth device list.
  1. Connect a USB-C cable to a power source such as a powered-on computer or a wall charger.
  2. Place both earbuds in the charging case. They should magnetically snap into place.
  3. With the earbuds in the charging case and the case open, press-and-hold the button on the side of the case. While pressing the button, connect the USB-C cable to the port on the side of the case.
    The status light immediately turns off. The reset is complete.
  4. Release the button.
    The status light will illuminate and reflect the charge level of case.
  5. Remove the USB-C cable.

Restoring the Earbuds to Factory Settings

A restore to factory settings clears all settings and returns the earbuds to their original out-of-box state. After, the earbuds can be configured as if they were being set up for the first time.

To restore the earbuds to factory settings:

  1. On the device(s) connected to the earbuds, remove the Bose Sport Open Earbuds from the list of paired/connected devices.
  2. In the Bose app icon , remove the earbuds from your Bose account icon
  3. Connect a USB-C cable to a power source, such as a powered-on computer or a wall charger.
  4. With the earbuds in the charging case and the case open, press-and-hold the button on the side of the case. While pressing the button, connect the USB-C cable to the port on the side of the case.
    The status light immediately turns off.
  5. Release the button.
    The status light will illuminate and reflect the charge level of case.
  6. Within 45 seconds, repeat the previous three steps two more times.
    After the third time, within 10 to 15 seconds the status light blinks amber for three seconds to indicate factory settings are being restored.
When the restore is complete, the status light slowly pulses blue. The earbuds are now in their original out-of-box state.