Difficulty connecting the surround speakers wirelessly | Virtually Invisible® 300 wireless surround speakers

1. Turn off the system.
2. Disconnect the power cords from both rear speaker receivers. Wait 30 seconds.
3. Reconnect the power cords to each receiver.
4. Turn the system back on and confirm the status LED on the receiver turn on and stays white which indicates it has connected to a soundbar or control console.

Since this accessory only works when connected to a host product (i.e. soundbar or home theater console), and the required steps can vary by product, refer to help content for your host product by selecting "Not your product?" above.